BVMI - A Division of Dynamic Controls Ltd.

Series 34 Bellows Seal Globe Valve

Please Contact BVMI - A Division of Dynamic Controls Ltd. for questions about this product:

 

Class 800 Bellows Seal Globe Valve to BS5352, Conventional Bore, OutsideSeries 34 Bellows Seal Globe Valve Screw and Yoke, Bolted Bonnet.
Bellows Seal Valve is available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat. Bellows Seal Valve can be supplied with Actuator - Electric or Pneumatic.
Materials for the Bellows Seal Valve can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425°C.
If in doubt, please ask; we will advise suitable materials for the temperature, pressure and media.
Actuator shown is pneumatic piston actuator, and is sized for 30 Bar (440 psi) line pressure and 8 Bar (118 psi) Actuator pressure. Overall height will vary depending upon these variables.