Please Contact Dynamic Controls Ltd. for questions about this product:
Valve Body Size | Est. Weight | Pipe Size | Cv | |
---|---|---|---|---|
A2 | 3Kg/6.6lbs | NB15 – ½” | 6 | Worker Pressure Operating Pressure 280 Bar/4000 psi |
B3 | 6Kg/13.2lbs | NB20 – ¾” | 18 | |
C4 | 15Kg/33lbs | NB25 – 1” | 36 | |
D5 | 39Kg/87lbs | NB32 – 1 ¼” | 55 | |
E6 | 63Kg/138lbs | NB40 1 ½” | 140 | |
G7 | 98Kg/216lbs | NB50 – 2” | 250 | 400 Bar/6000 psi |
H8 | 101Kg/232lbs | NB65 – 2 ½” | 250 | |
J9 | 101Kg/232lbs | NB80 – 3” | 250 |
AIR AVBS = Aux Vent & Blow System BIB = Built in Breathing System & Hood Inflation System DDS = Diesel Air Start System EBA = Emergency Air Breathing System FAS = Firing Air Systems HPA = High Pressure Air System HPB = High Pressure Blow System MLO = Main Lub Oil System WHA = Weapons Handling System DQA = Divers Quality Breathing Air System CO2 CDR = Carbon Dioxide Removal System HYDROGEN LPE = Electrolyser System METHANOL GM = Gas Mgmt Plant System |
NITROGEN HPDHR System N = Nitrogen System PC = Primary Circuit OPG = Valve OP & Gas System WM = Water Mist System WATER E = Emergency Core Cooling System FT = Feed Transfer System H&C = Hot & Cold Domestic System PCD = Primary Coolant Discharge System PCM = Primary Coolant Make-up System PCS = Primary Coolant Sampling System PSW = Primary Shield Water System RCFW = RCFW Cooling System EBS = Emergency Blow System |
OIL EHP = External Hydraulic Power Plant EHS = External Hydraulics Systems HTS = Hydraulic Oil Fill & Transfer System HDS = Hydroplane & Steering Control System HHP = Hydroplane & Steering Gear Hydraulic Power Plant MHP = Main Hydraulic Power Plant HS = Main Hydraulic System SP = Secondary Propulsion System WH = Weapons Handling System HFI = Hydraulic Fire Isolation |
INSTALLED BASE | NO.OF SUBMARINES/SHIPS SUBM | VALVES PER SUBMARIN | TOTAL NO VALVES | DATE OF COMMISSION | |
U.K.![]() |
SWIFTSURE-SSN ![]() |
5 | 980 | 4,900 | 1st Commissioned: 1973 |
TRAFALGAR-SSN ![]() |
7 | 1,750 | 12,250 | 1st Commissioned: 1985 | |
VANGUARD-SSBN ![]() |
4 | 2,067 | 8,268 | 1st Commissioned: 1993 | |
ASTUTE-SSN ![]() |
5 | 1,860 | 9,310 | 1st Commissioned: 2010 5 Boats Confirmed |
|
U.S.A.![]() |
SEAWOLF-SSN ![]() |
3 | 4 | 12 | 1st Commissioned: 1997 |
VIRGINIA-SSN ![]() |
18 | 4 | 72 | 1st Commissioned: 2004 18 Boats Confirmed |
|
CANADA ![]() |
VICTORIA-SS ![]() |
4 | 1,260 | 5,040 | formerly Upholder (UK): 1st Commissioned: 1986 Victoria (Canada) Commissioned: 2000 |
SPAIN![]() |
S-80 CLASS-SS ![]() |
4 | 580 | 1st to be Commissioned 2013 | |
FRANCE![]() |
BARRACUDA-SSN ![]() |
4 | 1,250 | 1st to be Commissioned : Expected in 2017 | |
U.S.A![]() |
OHIO REPLACEMNT PROGRAM(ORP)-SSBN ![]() |
Future Request | “To be Determined” | ||
U.K.![]() |
OHIO REPLACEMNT PROGRAM(ORP)—SSBN ![]() |
Future Request | “To be Determined” | ||
NETHERLANDS![]() |
M-CLASS FRIGATES ![]() |
7 | 925 | 6,475 | 1st Commissioned : 1991 |
SPAIN![]() |
OFFSHORE PATROL VESSEL ![]() |
8 | 95 | 760 | 1st Commissioned : 2009 |
INDIA![]() |
PROJECT 17 ![]() |
3 | 486 | 1,458 | 1st Commissioned : 2010 |
AIRCRAFT CARRIER ![]() |
1 | 360 | 1st to be Commissioned: Expected in 2014 | ||
INDIA![]() |
ROCKET LAUNCH ![]() |
1 | 1,842 | ||
U.S.A![]() |
AIRCRAFT CARRIER-CVN 78 ![]() |
1 | 680 | 1st to be Commissioned: Expected in 2015 | |
AIRCRAFT CARRIER-CVN 79 ![]() |
1 | 680 |
TOTAL INSTALLED BASE | No. of Submarines/Ships | Total No. of Valves |
---|---|---|
Sbmarines | 54 | 41,682 |
Aircraft Carriers/ Naval Surface Ships | 21 | 10,413 |
Rocket Launch | 1 | 1,842 |
total |
76 |
53,937 |
VALVE TECHNICAL DATA SHEET STOP VALVE 801 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Aluminium/Stainless Steel |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
801-A2 | 2Kg/4.4lbs | NB15/½” | 6 | 75/2.95 | 28/1.1 | 125/4.9 | 64/2.5 | 97/3.8 | 215/8.46 |
801-B3 | 4Kg/8.8lbs | NB20/¾” | 18 | 95/3.7 | 29/1.14 | 145/5.71 | 86/3.39 | 16/0.63 | 228/8.98 |
801-C4 | 10Kg/22lbs | NB25/1” | 36 | 105/4.1 | 39/1.54 | 190/7.48 | 112/4.41 | 155/6.1 | 254/10.0 |
801-D5 | 26Kg/58lbs | NB32/1¼” | 55 | 115/4.5 | 44/1.73 | 250/9.84 | 137/5.39 | 180/7.09 | 280/11.0 |
801-E6 | 42Kg/92lbs | NB40/1½” | 140 | 180/7.1 | 50/1.97 | 285/11.22 | 175/6.89 | 230/9.06 | 304/12.0 |
801-G7 | 65Kg/143lbs | NB50/2” | 250 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
801-H8 | 65Kg/143lbs | NB75/2.5” | 250 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET STOP VALVE 801 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Airtight Test | 440 Bar/ 6600psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Aluminium/Stainless Steel |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
801-A2 | 2Kg/4.4lbs | NB15/½” | 6 | 75/2.95 | 28/1.1 | 125/4.9 | 64/2.5 | 97/3.8 | 215/8.46 |
801-B3 | 4Kg/8.8lbs | NB20/¾” | 18 | 95/3.7 | 29/1.14 | 145/5.71 | 86/3.39 | 16/0.63 | 228/8.98 |
801-C4 | 10Kg/22lbs | NB25/1” | 36 | 105/4.1 | 39/1.54 | 190/7.48 | 112/4.41 | 155/6.1 | 254/10.0 |
801-D5 | 26Kg/58lbs | NB32/1¼” | 55 | 115/4.5 | 44/1.73 | 250/9.84 | 137/5.39 | 180/7.09 | 280/11.0 |
801-E6 | 42Kg/92lbs | NB40/1½” | 140 | 180/7.1 | 50/1.97 | 285/11.22 | 175/6.89 | 230/9.06 | 304/12.0 |
801-G7 | 65Kg/143lbs | NB50/2” | 250 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
801-H8 | 65Kg/143lbs | NB75/2.5” | 250 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET CHECK VALVE 802 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Lift Pressure & Seating Pressure | 0.5 bar (7.5 psi) | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
802-A2 | 1.3Kg/2.9lbs | NB15/½” | 5 | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
802-B3 | 3.4Kg/7.5lbs | NB20/¾” | 16 | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
802-C4 | 8.4Kg/18.5lb | NB25/1” | 35 | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
802-D5 | 16.4Kg/36lbs | NB32/1¼” | 52 | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
802-E6 | 39Kg/86lbs | NB40/1½” | 130 | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
802-G7 | 65Kg/143lbs | NB50/2” | 235 | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET CHECK VALVE 802 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Airtight Test | 440 Bar/ 6600psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Lift Pressure & Seating Pressure | 0.5 bar (7.5 psi) | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
802-A2 | 1.3Kg/2.9lbs | NB15/½” | 5 | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
802-B3 | 3.4Kg/7.5lbs | NB20/¾” | 16 | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
802-C4 | 8.4Kg/18.5lb | NB25/1” | 35 | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
802-D5 | 16.4Kg/36lbs | NB32/1¼” | 52 | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
802-E6 | 39Kg/86lbs | NB40/1½” | 130 | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
802-G7 | 65Kg/143lbs | NB50/2” | 235 | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET SCREW DOWN NON-RETURN VALVE 803 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Aluminium/Stainless Steel |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
803-A2 | 2Kg/4.4lbs | NB15/½” | 5 | 75/2.95 | 28/1.1 | 125/4.9 | 64/2.5 | 97/3.8 | 215/8.46 |
803-B3 | 4Kg/8.8lbs | NB20/¾” | 16 | 95/3.7 | 29/1.14 | 145/5.71 | 86/3.39 | 16/0.63 | 228/8.98 |
803-C4 | 10Kg/22lbs | NB25/1” | 35 | 105/4.1 | 39/1.54 | 190/7.48 | 112/4.41 | 155/6.1 | 254/10.0 |
803-D5 | 26Kg/58lbs | NB32/1¼” | 52 | 115/4.5 | 44/1.73 | 250/9.84 | 137/5.39 | 180/7.09 | 280/11.0 |
803-E6 | 42Kg/92lbs | NB40/1½” | 130 | 180/7.1 | 50/1.97 | 285/11.22 | 175/6.89 | 230/9.06 | 304/12.0 |
803-G7 | 65Kg/143lbs | NB50/2” | 235 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET SCREW DOWN NON-RETURN VALVE 803 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Airtight Test | 440 Bar/ 6600psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Aluminium/Stainless Steel |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
803-A2 | 2Kg/4.4lbs | NB15/½” | 5 | 75/2.95 | 28/1.1 | 125/4.9 | 64/2.5 | 97/3.8 | 215/8.46 |
803-B3 | 4Kg/8.8lbs | NB20/¾” | 16 | 95/3.7 | 29/1.14 | 145/5.71 | 86/3.39 | 16/0.63 | 228/8.98 |
803-C4 | 10Kg/22lbs | NB25/1” | 35 | 105/4.1 | 39/1.54 | 190/7.48 | 112/4.41 | 155/6.1 | 254/10.0 |
803-D5 | 26Kg/58lbs | NB32/1¼” | 52 | 115/4.5 | 44/1.73 | 250/9.84 | 137/5.39 | 180/7.09 | 280/11.0 |
803-E6 | 42Kg/92lbs | NB40/1½” | 130 | 180/7.1 | 50/1.97 | 285/11.22 | 175/6.89 | 230/9.06 | 304/12.0 |
803-G7 | 65Kg/143lbs | NB50/2” | 235 | 148/5.83 | 122/4.8 | 420/16.54 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET NORMALLY CLOSED AIR ATUATED STOP VALVE 806 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Actuator Type | Single Acting Spring Return, Direct Mount Piston | |
Actuator Action | Air to Open | |
Actuator Pressure | 6 bar/100 psi maximum | |
Response Time | Up to 25 NB <2sec to open, < 3sec to close Above 25NB <5 sec to open <7sec to close |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
806-A2 | 3Kg/6.6lbs | NB15/½” | 6 | 5/0.2 | 90/3.5 | 325/12.8 | 102/4.0 | 250/9.8 | 215/8.46 |
806-B3 | 6Kg/13.2lbs | NB20/¾” | 18 | 38/1.5 | 135/5.3 | 384/15.1 | 116/4.6 | 275/10.8 | 228/8.98 |
806-C4 | 15Kg/33lbs | NB25/1” | 36 | 14/0.6 | 150/5.9 | 480/18.9 | 130/5.1 | 350/13.8 | 254/10.0 |
806-D5 | 39Kg/87lbs | NB32/1¼” | 55 | 15/0.6 | 140/5.5 | 540/21.3 | 180/7.1 | 400/15.8 | 280/11.0 |
806-E6 | 63Kg/138lbs | NB40/1½” | 140 | 25/1 | 224/8.8 | 676/26.7 | 210/8.3 | 490/19.3 | 304/12.0 |
806-G7 | 98Kg/216lbs | NB50/2” | 250 | 30/1.2 | 310/12.2 | 825/32.5 | 270/10.6 | 650/25.6 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation |
VALVE TECHNICAL DATA SHEET NORMALLY CLOSED AIR ATUATED STOP VALVE 806 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Airtight Test | 440 Bar/ 6600psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Actuator Type | Single Acting Spring Return, Direct Mount Piston | |
Actuator Action | Air to Open | |
Actuator Pressure | 6 bar/100 psi maximum | |
Response Time | Up to 25 NB <2sec to open, < 3sec to close Above 25NB <5 sec to open <7sec to close |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
806-A2 | 3Kg/6.6lbs | NB15/½” | 6 | 5/0.2 | 90/3.5 | 325/12.8 | 102/4.0 | 250/9.8 | 215/8.46 |
806-B3 | 6Kg/13.2lbs | NB20/¾” | 18 | 38/1.5 | 135/5.3 | 384/15.1 | 116/4.6 | 275/10.8 | 228/8.98 |
806-C4 | 15Kg/33lbs | NB25/1” | 36 | 14/0.6 | 150/5.9 | 480/18.9 | 130/5.1 | 350/13.8 | 254/10.0 |
806-D5 | 39Kg/87lbs | NB32/1¼” | 55 | 15/0.6 | 140/5.5 | 540/21.3 | 180/7.1 | 400/15.8 | 280/11.0 |
806-E6 | 63Kg/138lbs | NB40/1½” | 140 | 25/1 | 224/8.8 | 676/26.7 | 210/8.3 | 490/19.3 | 304/12.0 |
806-G7 | 98Kg/216lbs | NB50/2” | 250 | 30/1.2 | 310/12.2 | 825/32.5 | 270/10.6 | 650/25.6 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation |
VALVE TECHNICAL DATA SHEET NORMALLY OPEN AIR ATUATED STOP VALVE 807 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Actuator Type | Single Acting Spring Return, Direct Mount Piston | |
Actuator Action | Air to Close | |
Actuator Pressure | 6 bar/100 psi maximum | |
Response Time | Up to 25 NB <2sec to close, < 3sec to open Above 25NB <5 sec to close <7sec to open |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
807-A2 | 3Kg/6.6lbs | NB15/½” | 6 | 5/0.2 | 90/3.5 | 325/12.8 | 102/4.0 | 250/9.8 | 215/8.46 |
807-B3 | 6Kg/13.2lbs | NB20/¾” | 18 | 38/1.5 | 135/5.3 | 384/15.1 | 116/4.6 | 275/10.8 | 228/8.98 |
807-C4 | 15Kg/33lbs | NB25/1” | 36 | 14/0.6 | 150/5.9 | 480/18.9 | 130/5.1 | 350/13.8 | 254/10.0 |
807-D5 | 39Kg/87lbs | NB32/1¼” | 55 | 15/0.6 | 140/5.5 | 540/21.3 | 180/7.1 | 400/15.8 | 280/11.0 |
807-E6 | 63Kg/138lbs | NB40/1½” | 140 | 25/1 | 224/8.8 | 676/26.7 | 210/8.3 | 490/19.3 | 304/12.0 |
807-G7 | 98Kg/216lbs | NB50/2” | 250 | 30/1.2 | 310/12.2 | 825/32.5 | 270/10.6 | 650/25.6 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation |
VALVE TECHNICAL DATA SHEET NORMALLY OPEN AIR ATUATED STOP VALVE 807 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Airtight Test | 440 Bar/ 6600psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Actuator Type | Single Acting Spring Return, Direct Mount Piston | |
Actuator Action | Air to Close | |
Actuator Pressure | 6 bar/100 psi maximum | |
Response Time | Up to 25 NB <2sec to close, < 3sec to open Above 25NB <5 sec to close <7sec to open |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
807-A2 | 3Kg/6.6lbs | NB15/½” | 6 | 5/0.2 | 90/3.5 | 325/12.8 | 102/4.0 | 250/9.8 | 215/8.46 |
807-B3 | 6Kg/13.2lbs | NB20/¾” | 18 | 38/1.5 | 135/5.3 | 384/15.1 | 116/4.6 | 275/10.8 | 228/8.98 |
807-C4 | 15Kg/33lbs | NB25/1” | 36 | 14/0.6 | 150/5.9 | 480/18.9 | 130/5.1 | 350/13.8 | 254/10.0 |
807-D5 | 39Kg/87lbs | NB32/1¼” | 55 | 15/0.6 | 140/5.5 | 540/21.3 | 180/7.1 | 400/15.8 | 280/11.0 |
807-E6 | 63Kg/138lbs | NB40/1½” | 140 | 25/1 | 224/8.8 | 676/26.7 | 210/8.3 | 490/19.3 | 304/12.0 |
807-G7 | 98Kg/216lbs | NB50/2” | 250 | 30/1.2 | 310/12.2 | 825/32.5 | 270/10.6 | 650/25.6 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Additional leak testing for valves to be used with Helium | ||||||||
Limit switches for confirmation of operation |
VALVE TECHNICAL DATA SHEET FLUSHING ADAPTOR 810 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi | |
Porting Arrangement | To facilitate different flow directions | |
Shock Qualification | Not Required | |
Vibration Qualification | Not Required | |
Leakage Class | Not Applicable | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150, Aluminium |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | Not Applicable |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
810-A2 | 1.3Kg/2.9lbs | NB15/½” | 5 | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
810-B3 | 3.4Kg/7.5lbs | NB20/¾” | 16 | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
810-C4 | 8.4Kg/18.5lb | NB25/1” | 35 | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
810-D5 | 16.4Kg/36lbs | NB32/1¼” | 52 | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
810-E6 | 39Kg/86lbs | NB40/1½” | 130 | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
810-G7 | 65Kg/143lbs | NB50/2” | 235 | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET FLUSHING ADAPTOR 810 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi | |
Porting Arrangement | To facilitate different flow directions | |
Shock Qualification | Not Required | |
Vibration Qualification | Not Required | |
Leakage Class | Not Applicable | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150, Aluminium |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | Not Applicable |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
810-A2 | 1.3Kg/2.9lbs | NB15/½” | 5 | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
810-B3 | 3.4Kg/7.5lbs | NB20/¾” | 16 | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
810-C4 | 8.4Kg/18.5lb | NB25/1” | 35 | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
810-D5 | 16.4Kg/36lbs | NB32/1¼” | 52 | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
810-E6 | 39Kg/86lbs | NB40/1½” | 130 | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
810-G7 | 65Kg/143lbs | NB50/2” | 235 | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET RELIEF VALVE 813 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-22549 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Ranges Available | 8 bands ranging form 1 bar (7.5 psi) to 370 bar (5365 psi) | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Accumulation Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Re-seat Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
813-B3 | 7Kg/15.4lbs | NB20/¾” | 0.39 | 28/1.1 | 118/4.65 | 145/5.71 | 73/2.87 | 250/9.84 | 228/8.98 |
813-C4 | 12Kg/26.4lbs | NB25/1” | 0.31 | 35/1.38 | 125/4.92 | 190/7.48 | 89/3.5 | 332/13.07 | 254/10.0 |
813-D5 | 30Kg/66lbs | NB32/1¼” | 0.28 | 75/2.95 | 165/6.5 | 250/9.84 | 109/4.29 | 414/16.3 | 280/11.0 |
813-E6 | 52Kg/115lbs | NB40/1½” | 0.24 | 130/5.12 | 220/8.66 | 285/11.22 | 140/5.51 | 554/21.81 | 304/12.0 |
813-G7 | 75Kg/165lbs | NB50/2” | 0.24 | 192/7.56 | 282/11.1 | 420/16.54 | 200/7.87 | 705/27.76 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET RELIEF VALVE 813 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-22549 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Ranges Available | 8 bands ranging form 1 bar (7.5 psi) to 370 bar (5365 psi) | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Accumulation Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Re-seat Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
813-A2 | 4Kg/8.8lbs | NB15/½” | 0.46 | 20/0.79 | 110/4.33 | 125/4.9 | 60/2.36 | 240/9.45 | 215/8.46 |
813-B3 | 7Kg/15.4lbs | NB20/¾” | 0.39 | 28/1.1 | 118/4.65 | 145/5.71 | 73/2.87 | 250/9.84 | 228/8.98 |
813-C4 | 12Kg/26.4lbs | NB25/1” | 0.31 | 35/1.38 | 125/4.92 | 190/7.48 | 89/3.5 | 332/13.07 | 254/10.0 |
813-D5 | 30Kg/66lbs | NB32/1¼” | 0.28 | 75/2.95 | 165/6.5 | 250/9.84 | 109/4.29 | 414/16.3 | 280/11.0 |
813-E6 | 52Kg/115lbs | NB40/1½” | 0.24 | 130/5.12 | 220/8.66 | 285/11.22 | 140/5.51 | 554/21.81 | 304/12.0 |
813-G7 | 75Kg/165lbs | NB50/2” | 0.24 | 192/7.56 | 282/11.1 | 420/16.54 | 200/7.87 | 705/27.76 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET FILTER VALVE 814 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ Mil-F-8815 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Filtration Range | 6 bands ranging for 10μ to 250μ absolute | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum ΔP at rated flow | 0.1 kg/cm2 | |
Filter Mesh Minimum Surface Area | 500% of Inlet Pipe Area | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Not Applicable |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
814-A2 | 1.3Kg/2.9lbs | NB15/½” | N/A | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
814-B3 | 3.4Kg/7.5lbs | NB20/¾” | N/A | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
814-C4 | 8.4Kg/18.5lb | NB25/1” | N/A | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
814-D5 | 16.4Kg/36lbs | NB32/1¼” | N/A | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
814-E6 | 39Kg/86lbs | NB40/1½” | N/A | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
814-G7 | 65Kg/143lbs | NB50/2” | N/A | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET FILTER VALVE 814 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ Mil-F-8815 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Filtration Range | 6 bands ranging for 10μ to 250μ absolute | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum ΔP at rated flow | 0.1 kg/cm2 | |
Filter Mesh Minimum Surface Area | 500% of Inlet Pipe Area | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | Not Applicable |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Not Applicable |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
814-A2 | 1.3Kg/2.9lbs | NB15/½” | N/A | 80/3.5 | 19/0.75 | 90/3.54 | 64/2.52 | 80/3.15 | 215/8.46 |
814-B3 | 3.4Kg/7.5lbs | NB20/¾” | N/A | 105/413 | 19/0.75 | 110/4.33 | 86/3.39 | 95/6.81 | 228/8.98 |
814-C4 | 8.4Kg/18.5lb | NB25/1” | N/A | 145/5.71 | 23/0.91 | 135/5.31 | 112/4.41 | 120/4.72 | 254/10.0 |
814-D5 | 16.4Kg/36lbs | NB32/1¼” | N/A | 170/6.69 | 30/1.18 | 165/6.5 | 137/5.39 | 160/6.3 | 280/11.0 |
814-E6 | 39Kg/86lbs | NB40/1½” | N/A | 185/7.28 | 50/1.97 | 215/8.46 | 175/6.89 | 200/7.87 | 304/12.0 |
814-G7 | 65Kg/143lbs | NB50/2” | N/A | 164/6.46 | 115/4.53 | 251/9.88 | 275/10.83 | 368/14.49 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET DOME LOADED PRESSURE REGULATOR 817 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-2961 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Dome Setting | 1:1 Ratio with set pressure | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Lock-up Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Droop Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
817-A2 | 4Kg/8.8lbs | NB15/½” | 1.5 | 26/1.02 | 63/2.48 | 125/4.9 | 75/2.95 | 225/8.86 | 215/8.46 |
817-B3 | 7Kg/15.4lbs | NB20/¾” | 4 | 35/1.38 | 105/4.13 | 145/5.71 | 113/4.45 | 295/11.61 | 228/8.98 |
817-C4 | 12Kg/26.4lbs | NB25/1” | 7 | 77.3.03 | 124/4.88 | 190/7.48 | 140/5.51 | 310/12.2 | 254/10.0 |
817-D5 | 30Kg/66lbs | NB32/1¼” | 12 | 103/4.06 | 150/5.91 | 250/9.84 | 178/7.0 | 375/14.76 | 280/11.0 |
817-E6 | 52Kg/115lbs | NB40/1½” | 25 | 149/5.87 | 196/7.72 | 285/11.22 | 230/9.06 | 490/19.29 | 304/12.0 |
817-G7 | 75Kg/165lbs | NB50/2” | 46 | 200/7.87 | 248/9.76 | 420/16.54 | 350/13.78 | 620/20.41 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET DOME LOADED PRESSURE REGULATOR 817 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-2961 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Dome Setting | 1:1 Ratio with set pressure | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Lock-up Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Droop Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
817-A2 | 4Kg/8.8lbs | NB15/½” | 1.5 | 26/1.02 | 63/2.48 | 125/4.9 | 75/2.95 | 225/8.86 | 215/8.46 |
817-B3 | 7Kg/15.4lbs | NB20/¾” | 4 | 35/1.38 | 105/4.13 | 145/5.71 | 113/4.45 | 295/11.61 | 228/8.98 |
817-C4 | 12Kg/26.4lbs | NB25/1” | 7 | 77.3.03 | 124/4.88 | 190/7.48 | 140/5.51 | 310/12.2 | 254/10.0 |
817-D5 | 30Kg/66lbs | NB32/1¼” | 12 | 103/4.06 | 150/5.91 | 250/9.84 | 178/7.0 | 375/14.76 | 280/11.0 |
817-E6 | 52Kg/115lbs | NB40/1½” | 25 | 149/5.87 | 196/7.72 | 285/11.22 | 230/9.06 | 490/19.29 | 304/12.0 |
817-G7 | 75Kg/165lbs | NB50/2” | 46 | 200/7.87 | 248/9.76 | 420/16.54 | 350/13.78 | 620/20.41 | 368/14.5 |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET SPRING LOADED PRESSURE REGULATOR 818 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-2961 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Ranges Available | 8 bands ranging form 1 bar (7.5 psi) to 370 bar (5365 psi) | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Lock-up Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Droop Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold.Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
E (mm/ins) |
F (mm/ins) |
818-A2 | 4Kg/8.8lbs | NB15/½” | 1.5 | 20/0.79 | 110/4.33 | 125/4.9 | 60/2.36 | 240/9.45 | 215/8.46 |
818-B3 | 7Kg/15.4lbs | NB20/¾” | 4 | 28/1.1 | 118/4.65 | 145/5.71 | 73/2.87 | 250/9.84 | 228/8.98 |
818-C4 | 12Kg/26.4lbs | NB25/1” | 7 | 35/1.38 | 125/4.92 | 190/7.48 | 89/3.5 | 332/13.07 | 254/10.0 |
818-D5 | 30Kg/66lbs | NB32/1¼” | 12 | 75/2.95 | 165/6.5 | 250/9.84 | 109/4.29 | 414/16.3 | 280/11.0 |
818-E6 | 52Kg/115lbs | NB40/1½” | 25 | 130/5.12 | 220/8.66 | 285/11.22 | 140/5.51 | 554/21.81 | 304/12.0 |
818-G7 | 75Kg/165lbs | NB50/2” | 46 | 192/7.56 | 282/11.1 | 420/16.54 | 200/7.87 | 705/27.76 | 368/14.5 |
PRODUCT OPTION | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET SPRING LOADED PRESSURE REGULATOR 818 400 Bar 6000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-2961 | |
Working Pressure | 400 Bar / 6000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 600 Bar / 9000psi (High pressure and low pressure sides) | |
Ranges Available | 8 bands ranging form 1 bar (7.5 psi) to 370 bar (5365 psi) | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Maximum Lock-up Pressure | >7 bar set point: Set point plus 10%, <7 bar Set point: 2 bar | |
Minimum Droop Pressure | >7 bar set point: Set point minus 10%, <7 bar Set point: 2 bar | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
E (mm/ins) |
F (mm/ins) |
818-A2 | 4Kg/8.8lbs | NB15/½” | 1.5 | 20/0.79 | 110/4.33 | 125/4.9 | 60/2.36 | 240/9.45 | 215/8.46 |
818-B3 | 7Kg/15.4lbs | NB20/¾” | 4 | 28/1.1 | 118/4.65 | 145/5.71 | 73/2.87 | 250/9.84 | 228/8.98 |
818-C4 | 12Kg/26.4lbs | NB25/1” | 7 | 35/1.38 | 125/4.92 | 190/7.48 | 89/3.5 | 332/13.07 | 254/10.0 |
818-D5 | 30Kg/66lbs | NB32/1¼” | 12 | 75/2.95 | 165/6.5 | 250/9.84 | 109/4.29 | 414/16.3 | 280/11.0 |
818-E6 | 52Kg/115lbs | NB40/1½” | 25 | 130/5.12 | 220/8.66 | 285/11.22 | 140/5.51 | 554/21.81 | 304/12.0 |
818-G7 | 75Kg/165lbs | NB50/2” | 46 | 192/7.56 | 282/11.1 | 420/16.54 | 200/7.87 | 705/27.76 | 368/14.5 |
PRODUCT OPTION | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | |||||||||
Stainless Steel cartridges in manifolds for 400 bar systems | Viton seals for operation at higher temperatures |
VALVE TECHNICAL DATA SHEET ELECTRICALLY ACTUATED STOP VALVE 821 280 Bar 4000 psi |
|
![]() |
![]() |
Technical Data | ||
Design Specification | Based on NES 375/ MIL-V-24109 | |
Working Pressure | 280 Bar / 4000 psi | |
Working Temperature | Min –20ºC/-4ºF | Max 120ºC/250ºF | |
Medium | Air, Nitrogen, Helium, Oxygen. Hydraulic Fluid. | |
Quality Assurance Level | En 10204, 3.1b also Full traceability – MIC Level 1 | |
Cleaning | TP102, Oxygen cleaning to MIL-STD-1330 | |
Hydrostatic Test | 420 Bar / 6000psi (High pressure and low pressure sides) | |
Airtight Test | 308 Bar/ 3400psi | |
Shock Qualification | MIL-S-901D | |
Vibration Qualification | MIL-STD-167-1 | |
Leakage Class | Bubble Tight as per ANSI Class VI | |
Housing | Material | 70/30 Copper Nickel to NES 780 Pt2, class 1/ASTM B151 |
Main Cartridge Components | Material | Nickel aluminium bronze to NES 833 part 2 /ASTM B150 |
Seals | Material | HNBR/ Fluorocarbon |
Seat | Material | PEEK virgin FL350 |
Nuts/Studs | Material | Stainless Steel NES 862/ASME 194/ASME 193 MIL-S-1222 |
Handwheel | Material | Not Applicable |
Connection Type | Cartridge flanged to housing or manifold. Housing welded or screwed (to be specified) |
OVERALL DIMENSIONS (CARTRIDGE AND HOUSING) | |||||||||
Product Designation |
Estimated Weight |
Pipe Size | CV | A (mm/ins) |
B (mm/ins) |
C (mm/ins) |
D (mm/ins) |
H (mm/ins) |
L (mm/ins) |
821-A2 | 4Kg/8.8lbs | NB15/½” | 6 | 21/0.8 | 97/3.8 | 295/11.6 | 64/2.5 | 287/11.3 | 215/8.46 |
821-B3 | 6.5Kg/14.3lb | NB20/¾” | 18 | 29/1.1 | 81/3.2 | 343/13.5 | 86/3.39 | 321/12.7 | 228/8.98 |
821-C4 | 11Kg/24.2lbs | NB25/1” | 36 | 70/2.8 | 85/3.3 | 370/24.7 | 112/4.41 | 342/13.5 | 254/10.0 |
821-D5 | NB 32/ 1¼" On Request | ||||||||
821-E6 | NB 40/ 1½" On Request | ||||||||
821-G7 | NB 50/ 2" On Request |
PRODUCT OPTIONS | |||||||||
Stainless Steel bodies and cartridges for a wider range of fluids such as Water, Steam, Oxygen, & Nitric Acid | Actuator voltage: 24v DC, 110v AC, 240v AC | ||||||||
Provided with Manual Override Facility | |||||||||
Stainless Steel cartridges in manifolds for 280 bar systems | Position Indicator Switches Provided |
The Cartridge Principal
Housings can be installed at a different time to that of the cartridge valve.
The housing becomes a permanent integral part of the system.
Each housing will accept the full range of cartridges only the size of the cartridge being the limiting factor.
Each cartridge valve is fully retractable from the housing
All parts are fully accessible including the seat and plug for easy maintenance.
Seat construction is such that replacement is by a simple one- touch clip arrangement.
Cleaning and pressure testing of the system is easily carried out before the installation of the cartridge valve by the use of specially designed flushing adapters and blanking covers.
Common components have been used throughout the entire range of cartridge valves ensuring that the spares requirements are minimized.
The fastening of the cartridge to the housing has been so arranged to ensure that the orientation of the valve is always positioned correctly.
The oblique (45° angle) pattern design gives a similar flow characteristic to that of a full flow ball valve, yet sealing is equivalent to that of a plug valve.