Air
Filter
804 Product Overview
Type 804 makes use of a stainless steel woven mesh element fabricated in to a tubular construction and sized to give an effective surface area equivalent to that of the bore of the inlet pipe.
• Pressure drop through the filter when fully cleaned is less than 0.1 barG (2psi) at full flow conditions.
• Available in 6 different sizes ranging from DN 6 to 50 (1\4" to 2").
• Maximum operating differential pressure is 5barG (75psi)
• The average mesh sizes available are 10, 20, 50 and 120 micron for the complete range. Other micron sizes are available on request.
 Materials of Construction
 Cartridges - Stainless
Steel Nickel Aluminum Bronze
Housings/Bodies - Stainless
Steel 70/30 Cu Ni
|
