Pressure
Regulator Product Overview
These pressure regulators come in two different types. Spring loaded type 818 where regulation accuracy of ±10% at full flow conditions is required or dome loaded type 817 where regulation accuracy of better than ± 2% is required at full flow.
• Inverse ratio on both models is greater than 200:1
• Manufactured in sizes ranging from 1\4" to 2" and for type 818 in 9 different spring ranges up to a maximum setting of 370 barG (5500 psi)
Materials of Construction
 Cartridges - Stainless Steel
Nickel Aluminum Bronze
Housings/Bodies – Stainless Steel
70/30 Cu Ni
|
